within the body of the jersey; or as decorative stripe(s) added in the shoulder area after
production, not to exceed 1 inch per stripe and total size of combined stripes not to exceed 3.5 inches,
(3) within the collar, a maximum of 1 inch in width, and/or
(4) as a side seam (insert connecting the back of the jersey to the front), a maximum of 4 inches in
width but any white color may not appear within the body of the jersey (inside the shoulders,
inclusive of the yoke of the jersey or the shoulders, below the collar, and to the bottom of the
jersey). The exception to (4) would be what is stated in (2) above.
NOTE: One American flag, not to exceed 2 inches by 3 inches, may be worn or occupy space on each
item of uniform apparel. By state association adoption, to allow for special occasions, commemorative
or memorial patches, not to exceed 4 square inches, may be worn on the uniform without compromising
its integrity.
(c) The visiting team is responsible for avoidance of similarity of colors, but if there is doubt, the referee
may require players of the home team to change jerseys.
c. Numbers:
1. The numbers shall be clearly visible and legible using Arabic numbers 0-99 inclusive and shall be on the
front and back of the jersey.
2. The numbers, inclusive of any border(s), shall be centered horizontally at least 8 inches and 10 inches
high on front and back, respectively.
3. The entire body of the number (the continuous horizontal bars and vertical strokes) exclusive of any
border(s) shall be approximately 1½-inches wide.
4. The color and style of the number shall be the same on the front and back.
5. The entire body of the number (the continuous horizontal bars and vertical strokes) shall be a single solid
color that clearly contrasts with the body color of the jersey.
d. Pads and Protective Equipment – The following pads and protective equipment are required of all players:
1. Hip pads and tailbone protector which are unaltered from the manufacturer’s original design/production.
2. Knee pads which are unaltered from the manufacturer’s original design/production, which are worn over
the knee and under the pants and shall be at least ½ inch thick or 3/8 inch thick if made of shock
absorbing material.
3. Shoulder pads and hard surface auxiliary attachments, which shall be fully covered by a jersey.
4. Thigh guards which are unaltered from the manufacturer’s original design/production.
e. Pants - which completely cover the knees, thigh guards and knee pads and any portion of any knee brace
that does not extend below the pants.
RULE 1-5-3:
ART. 3 . . . Illegal Equipment. No player shall participate while wearing illegal equipment. This applies to any
equipment, which in the opinion of the umpire is dangerous, confusing or inappropriate. Illegal equipment shall
always include but is not limited to:
a. The following items related to the Game Uniform:
1. Jerseys and pants that have:
(a) A visible logo/trademark or reference exceeding 2¼ square inches and exceeding 2¼ inches in
any dimension.
(b) More than one manufacturer’s logo/trademark or reference on the outside of either item. (The
same size restriction shall apply to either the manufacturer’s logo/trademark or reference).
(c) Sizing, garment care or other nonlogo labels on the outside of either item.
3. Tear-away jerseys or jerseys that have been altered in any manner that produces a knot-like
protrusion or creates a tear-away jersey.
4. Any transverse stripe on the sleeve below the elbow.
c. The following items related to Other Illegal Equipment:
1. Ball-colored helmets, jerseys, patches, exterior arm covers/pads, undershirts or gloves.
5. Jerseys, undershirts or exterior arm covers/pads manufactured to enhance contact with the football
or opponent.
9. Equipment not worn as intended by the manufacturer.