OneCommand® Manager Application for Solaris Release Notes 9
P011037-01A Rev. A
application groups are listed, along with their member users, this is an indication that the
host machine is sufficiently configured to work with OneCommand Manager Secure
Management.
4. FC in-band management is no longer supported.
5. The OneCommand Manager application no longer installs OneCommand Vision
components.
6. On OneConnect adapters, if you change the port speed via the Change Port Speed dialog
box, and the selected speed is supported by the adapter's port but is not supported by the
connected hardware, the link does not come up.
7. Requirement if DCB settings are connected to a non-data center bridging exchange
(DCBX) switch.
If DCB settings are required when connected to a non-DCBX switch (or switch with DCBX
disabled), DCBX must be disabled on the OneConnect adapter to use the adapter's
configured parameters. If DCBX is enabled, the DCB PFC and Priority Groups are ignored
(the adapter assumes that the switch does not support these parameters) and for FCoE
adapters, the FCoE priority (COS) is 3.
8. The OneCommand Manager application Firmware tab is in a different location for 8 Gb
and lower Fibre Channel adapters than it is for 16 GFC adapters and OneConnect CNAs.
Because the 16 GFC adapters and OneConnect CNAs share a single firmware image for all
ports on the adapter, the Firmware tab for them is at the adapter level. Because 8 GFC and
lower adapters have a separate firmware images for each individual port, the Firmware tab
for them is at the port level.
9. DH-CHAP authentication is no longer supported.
10. To view online help using the Google Chrome browser, you must disable Chrome's
security check using the "--allow-file-access-from-files" option.
a) Create a copy of the Chrome shortcut on the desktop and rename it to RH Chrome L
b) Right-click on the new Chrome icon and choose Properties.
c) Add the "--allow-file-access-from-files" text to the end of the path appearing in
Target. You must leave a space between the original string and the tag you are adding
to the end of it.
d) Click OK to save your settings.
e) Close any open instances of Chrome.
f) To open a local copy of the online help, use the new shortcut to open Chrome, then
hold down <Ctrl> and press Open and browse to the start page; or open Chrome
with the new shortcut, then right-click the start page and click Open With > Google
Chrome.
11. The OneCommand Manager application supports a maximum of 16 ASICs for
OneConnect adapters. Most OneConnect adapters have a single ASIC, so a maximum of
16 adapters can be seen and managed by the OneCommand Manager application. There
are some OneConnect adapter models that have two ASICs. When all the adapters have
two ASICS, a maximum of eight adapters can be seen and managed by the OneCommand
Manager application.