Power, Performance, Peace of Mind.
KG82.5W / KG82.5WS
SAE – Sound Attenuated Enclosure
Ratings are according to ISO 8528; refer to ratings definition on page 2.
Note: Above picture shown for illustration purpose only, actual product may be different.
Features
Extremely reliable.
Lower operating cost.
Easy maintenance – higher uptime.
Sound attenuating enclosure (canopy) is fully integrated and designed for all weather
conditions (weather proof).
Best in class Sound attenuation – 75 dB(A) at one meter as per ISO 8528
State of the art generating set control system with high degree of accuracy and reliability.
Ideally suitable for critical industries like Construction, Manufacturing, Textile, Telecom,
Services etc.
Superior design standards that minimize power deration even at high ambient temperatures.
Efficient and prompt after sales service available.
Winner of the frost & Sullivan Voice of Customer Award in the “Best Bang for Buck”
category in the Indian Generating sets Market.
Diesel Generating Set Output Ratings
Model
Prime Rating at
0.8 pf (lag)
Standby Rating at
0.8 pf (lag)
Phase / Volts / Hz
KG82.5W (OPEN)
82.5 kVA
66 kW
91 kVA
72.8 kW
3 Phase / 380 V / 50 Hz
KG82.5WS (SAE)
KG82.5W
KG82.5WS
Power, Performance, Peace of Mind.
Ratings Definition:
Standby Ratings:
These ratings are applicable for supplying continuous electrical power (at variable load) in the event
of a utility power failure. No overload is permitted on these ratings. The alternator on this model is
peak continuous rated (as defined in ISO 8528-3)
Prime Rating:
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of
commercial purchased power. There is no limitation to the annual hours of operation and this model
can supply 10% overload power for 1 hour in 12 hours.
Continuous Rating:
These ratings are applicable for supplying power continuously to a constant load upto the full output
rating for unlimited hours. No sustained overload capability is available for this rating.
CONTROL SYSTEM
Controller Make
Deepsea
Controller Model
DSE 6122
Digital display
instrumentation
Generator Voltage
Generator Amps
Generator Frequency
Mains Voltage
Battery Voltage
Engine hours Run
Oil Pressure Gauge
Engine Temperature Gauge
Fuel Level
Shutdowns/Safeties
Fail to Stop
Low Oil pressure
High Engine Temperature
Under/Over-speed
Under/Over voltage
Emergency Stop
Failed to reach loading voltage
Failed to reach loading frequency
Charge Fail
Over Current Low DC Voltage
Automatic Starting &
AMF facility
Available
GENERATING SET SPECIFICATIONS
Model - Open Type
KG82.5W
Model - SAE Type
KG82.5WS
Frequency (Hz)
50
Power Factor
0.8
Phase
Three phase
Line Voltage (Volts)
380
Phase Voltage (Volts)
220
Fuel Tank Capacity (Liters)
Open – 160
SAE – 160
Fuel consumption at 100%
load (lit/hr) +5% tolerance
19.24
Fuel consumption at 75%
load (lit/hr) +5% tolerance
14.43
Sound level at 1 m for Silent
Generating set dB(A)
75
Overall dimensions (cms)
Open - 235x110x175
SAE – 372x142x190
Weight (kgs)
Open Type – 1200
SAE Type – 1940
Power, Performance, Peace of Mind.
Engine Technical Data
Lubrication System
Type of lube oil filter
Full flow spin on type
Oil to be used
Multi grade 15W40
Oil pump type
Through G-rotor gear
pump
Lub oil sump capacity (lit)
11
Lube oil consumption
0.3% of fuel
consumption
Fuel System
Type of fuel filter
Two stage spin on type
Governor Type
Mechanical
Class of Governing
ISO 3046 Class A1 &
ISO 8528-5, Class G2
Fuel pump type
Inline
Fuel pump make
MICO - BOSCH
Recommended Fuel
Class A2,
High speed diesel
Fuel consumption at 100%
load (lit/hr) +5% tolerance
19.24
Fuel consumption at 75%
load (lit/hr) +5% tolerance
14.43
Fuel consumption readings are based on diesel fuel
with a specific gravity of 0.85 and confirming to BS
2869, Class A2)
Physical Data
Engine Make
Kirloskar
Engine Model
4R1040TA
Number of cylinders
4
Configuration
Inline
Type
Four stroke
Bore x Stroke (mm)
105 x 120
Displacement (cc)
4160
Cooling
Water cooled
Aspiration
Turbocharged
Aftercooled
Compression Ratio
18 : 1
Starting Arrangement
12V Electric
Air System
Air Filter Type
Dry type replaceable
element
Air Volume required for
Ventilation (m³/hr)
7720
Combustion air flow (m³/hr)
187
Total Air Flow required for
ventilation (m³/hr)
8433
Total Fresh air required
(m³/hr)
7860
Cooling System
Cooling system capacity (lit)
24
Water pump type
Centrifugal
Radiator fan load (hp)
4.5
Electrical System
Starting Arrangement
12V Electric
Starter
12V Electric
Starter Battery Rating
135
Battery charging alternator
Engine mounted 12V
battery charger
Battery charger amps
35
Power, Performance, Peace of Mind.
Alternator Technical Data
Sound Attenuating Enclosure (Canopy) General Data
KIRLOSKAR OIL ENGINES LIMITED.
Head Office:
Laxmanrao Kirloskar Road, Khadki, Pune 411 003, India.
Tel.: +91 20 2581 0341 / 534 Fax: +91 20 2581 3208 www.kirloskar.com
Email:[email protected] www.kirloskar.com
Kirloskar Oil Engines Limited reserved the right to change the design or specifications without notice.
Contact your local distributor for more details.
Operating Data
Over speed (RPM)
2250
Excitation
Self excited
Efficiency (%)
89.80
Total harmonic distortion at
full load AC waveform
Less than 5%
Voltage Regulation (%)
± 1.0
Reactance per unit (Xd)
2.45
Reactance per unit (X’d)
0.20
Reactance per unit (X’’d)
0.14
Physical Data
Manufacturer
Stamford
Model
UC274C
Number of bearings
1
Insulation class
H
Winding pitch
2/3
Wires
12
Ingress Protection Rating
IP 23
AVR Model
SX 460
Sound Level
75 dB(A) at 1 meter as per ISO 8528
Construction
Fully Integrated, metal construction
for ALL WEATHER USE (weather
proof).
Black zinc die cast, Aluminium hinges
or Stainless steel hinges tested to
withstand corrosive environment
conditions.
Fuel filling spout with lock.
Emergency stop button on canopy
exterior.
Provision of glass window for viewing
control panel
Provision for lifting canopy
Maintenance
Easy access through lockable doors for
operation/maintenance and repair works
(including access for radiator service)
Protection
Standard
IP 23 Standard
Documents
A full set of Illustrated
spare parts catalogue
Operation &
Maintenance manual
Circuit Diagrams
Quality
Standards
ISO 8528, ISO 3046, IS
100002, BS5514, DIN 6271,
ISO 9001, ISO 14001
