Product(s) manufactured in the USA and Colombia.
Always confirm that the product selected is consistent with the original equipment manufacturer's recommendation for the
equipment operating conditions and customer's maintenance practices.
A Chevron company product 20 May 2019
PCMO-90
© 2007-2019 Chevron U.S.A. Inc. All rights reserved.
Chevron, the Chevron Hallmark, Havoline, ProDS and Deposit Shield are trademarks owned by Chevron Intellectual Property LLC.
All other trademarks are property of their respective owners.
2-8
HAVOLINE
®
PRODS
®
FULL SYNTHETIC MOTOR
OIL
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30
PRODUCT DESCRIPTION
Havoline
®
ProDS
®
Full Synthetic Motor Oil provides
outstanding protection for grueling stop-and-go
driving, extended oil drain intervals, heavy loads and
for vehicles with turbo chargers and those that require
a synthetic motor oil.
FEATURES
Havoline ProDS Full Synthetic
Motor Oil with Deposit Shield
®
technology is specially engineered
for the highest level of protection demanded by high-
performance engines. It exhibits outstanding
protection against heat, pressure, corrosion, acid,
abrasion - all the things that can prematurely age
today’s smaller, higher output engines.
Havoline ProDS Full Synthetic Motor Oil with Deposit
Shield technology meets or exceeds the requirements
of API SN Plus Resource Conserving and ILSAC GF-5. It
provides:
• Outstanding protection against wear
1
• Outstanding protection against sludge and deposits
to keep your engine clean
2
• Outstanding protection against piston varnish in the
industry’s toughest high-temperature stress test
3
• Improved fuel economy
4
• Improved thermal stability for smaller and hotter
engines
• Excellent degradation control for long automaker-
recommended oil change intervals
• Extremely fast lubrication during start up
• Protects Gasoline Direct Injection (GDI) engines
from low-speed pre-ignition (LSPI)
SAE 0W-16 is an ultra-low viscosity engine oil
specially formulated for Toyota and Honda gasoline and
hybrid engines that are designed to operate on an SAE
0W-16 viscosity motor oil. Designed for modern start/
stop engines to provide outstanding fuel economy,
exceptionally fast lubrication at cold starts, and
excellent deposit control and wear protection. It meets
the requirements of API SN Plus/Resource Conserving
performance categories.
SAE 0W-20 is licensed under
the dexos1
TM
Gen 2
specification
5
(License no.
D10216GL089)
. It is recommended for use in FCA,
Ford, GM, Honda, Mazda, Mitsubishi, Nissan and
Toyota engines for either SAE 0W-20 or SAE 5W-20
applications. It can increase engine efficiency and
improve fuel economy up to 2% compared with
other common lubricant grades and provides
excellent engine protection in applications
recommending SAE 0W-20 or 5W-20 motor oils.
6
SAE 5W-20 is recommended for use in Acura,
Chrysler, FCA, Ford, Honda and Mazda engines where
an SAE 5W-20 viscosity grade is specified. It provides
1 Demonstrated in the Sequence IVA Wear Test for SAE
0W-16, 0W-20, 5W-20, 10W-30, and in the Peugeot
TU3M Pad Wear Performance parameter for 5W-30.
2 Demonstrated in the Sequence VG Test for SAE 0W-16,
0W-20, 5W-20, 10W-30, and in the Sequence VG
Rocker Cover Sludge Performance for 5W-30.
3 Demonstrated in the GM GMOD oxidation test for SAE
0W-20 and 5W-30.
4 Demonstrated in industry standard Sequence VID test
for SAE 0W-20 and 5W-30, and in API SN Plus Resource
Conserving and ILSAC GF-5 for SAE 5W-20 and 10W-
30.
5 dexos1 is a registered trademark of General Motors
LLC.
6 Actual savings are dependent upon vehicle/engine type,
outside temperature, driving conditions, and your
current engine oil viscosity.